unisonic technologies co., ltd 6n60-p power mosfet www.unisonic.com.tw 1 of 7 copyright ? 2015 unisonic technologies co., ltd qw-r502-969.c 6a, 600v n-channel power mosfet ? description the utc 6n60-p is a high voltage power mosfet and is designed to have better characteristics, such as fast switching time, low gate charge, low on-state resistance and have a high rugged avalanche characteristics. this power mosfet is usually used at high speed switching applications in switching power supplies and adaptors. ? features * r ds(on) < 1.75 ? @ v gs = 10v, i d = 3a * fast switching capability * avalanche energy tested * improved dv/dt capability, high ruggedness ? symbol to-251 1 1 to-252 to-220 to-220f2 to-263 1 1 to-220f 1 1 1 to-220f1 ? ordering information ordering number pin assignment lead free halogen free package 1 2 3 packing 6n60l-ta3-t 6n60g-ta3-t to-220 g d s tube 6n60l-tf1-t 6n60g-tf1-t to-220f1 g d s tube 6n60l-tf2-t 6n60g-tf2-t to-220f2 g d s tube 6n60l-tf3-t 6n60g-tf3-t to-220f g d s tube 6n60l-tm3-t 6N60G-TM3-T to-251 g d s tube 6n60l-tn3-r 6n60g-tn3-r to-252 g d s tape reel 6n60l-tq2-t 6n60g-tq2-t to-263 g d s tube 6n60l-tq2-r 6n60g-tq2-r to-263 g d s tape reel note: pin assignment: g: gate d: drain s: source
6n60-p power mosfet unisonic technologies co., ltd 2 of 7 www.unisonic.com.tw qw-r502-969.c ? marking
6n60-p power mosfet unisonic technologies co., ltd 3 of 7 www.unisonic.com.tw qw-r502-969.c ? absolute maximum ratings (t c = 25c, unless otherwise specified) parameter symbol ratings unit drain-source voltage v dss 600 v gate-source voltage v gss 30 v avalanche current (note 2) i ar 6 a continuous drain current i d 6 a pulsed drain current (note 2) i dm 24 a single pulsed (note 3) e as 260 mj avalanche energy repetitive (note 2) e ar 13 mj peak diode recovery dv/dt (note 4) dv/dt 3.0 ns to-220/to-263 125 w to-220f/to-220f1 40 w to-220f2 42 w power dissipation to-251/to-252 p d 55 w junction temperature t j +150 c operating temperature t opr -55 ~ +150 c storage temperature t stg -55 ~ +150 c notes: 1. absolute maximum ratings are those values be yond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. repetitive rating : pulse width limited by t j 3. l = 14mh, i as = 6a, v dd = 50v, r g = 25 ? , starting t j = 25c 4. i sd 6a, di/dt 200a/ s, v dd bv dss , starting t j = 25c ? thermal data parameter symbol rating unit to-220/to-220f2 to-220f/to-220f1 to-263 62.5 junction to ambient to-251/to-252 ja 110 c/w to-220/to-263 1.0 to-220f/to-220f1 3.2 to-220f2 2.97 junction to case to-251/to-252 jc 2.27 c/w
6n60-p power mosfet unisonic technologies co., ltd 4 of 7 www.unisonic.com.tw qw-r502-969.c ? electrical characteristics (t j =25c, unless otherwise specified) parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss v gs = 0v, i d = 250 a 600 v drain-source leakage current i dss v ds = 600v, v gs = 0v 10 a forward v gs = 30v, v ds = 0v 100 na gate- source leakage current reverse i gss v gs = -30v, v ds = 0v -100 na breakdown voltage temperature coefficient bv dss / t j i d =250 a, referenced to 25c 0.53 v/c on characteristics gate threshold voltage v gs(th) v ds = v gs , i d = 250 a 2.0 4.0 v static drain-source on-state resistance r ds(on) v gs = 10v, i d = 3a 1.2 1.75 ? dynamic characteristics input capacitance c iss 751 pf output capacitance c oss 89 pf reverse transfer capacitance c rss v ds =25v, v gs =0v, f=1.0 mhz 17 pf switching characteristics total gate charge q g 25 nc gate-source charge q gs 4.9 nc gate-drain charge q gd v ds =50v, i d =1.3a, v gs =10 v (note 1, 2) 9.4 nc turn-on delay time t d(on) 60 ns turn-on rise time t r 80 ns turn-off delay time t d(off) 230 ns turn-off fall time t f v dd =30v, i d =0.5a, r g =25 ? i g = 100 a (note 1, 2) 90 ns drain-source diode characteristics and maximum ratings drain-source diode forward voltage v sd v gs = 0 v, i s = 6 a 1.4 v maximum continuous drain-source diode forward current i s 6 a maximum pulsed drain-source diode forward current i sm 24 a reverse recovery time t rr 290 ns reverse recovery charge q rr v gs = 0 v, i s = 6 a, di f /dt = 100 a/ s (note 1) 3.0 c notes: 1. pulse test: pulse width 300 s, duty cycle 2%. 2. essentially independent of operating temperature.
6n60-p power mosfet unisonic technologies co., ltd 5 of 7 www.unisonic.com.tw qw-r502-969.c ? test circuits and waveforms same type as d.u.t. l v dd driver v gs r g - v ds d.u.t. + * dv/dt controlled by r g * i sd controlled by pulse period * d.u.t.-device under test - + peak diode recovery dv/dt test circuit p. w. period d= v gs (driver) i sd (d.u.t.) i fm , body diode forward current di/dt i rm body diode reverse current body diode recovery dv/dt body diode forward voltage drop v dd 10v v ds (d.u.t.) v gs = p.w. period peak diode recovery dv/dt waveforms
6n60-p power mosfet unisonic technologies co., ltd 6 of 7 www.unisonic.com.tw qw-r502-969.c ? test circuits and waveforms (cont.) v ds 90% 10% v gs t d(on) t r t d(off) t f switching test circuit switching waveforms 10v charge q gs q gd q g v gs gate charge test circuit gate charge waveform v dd t p time bv dss i as i d(t) v ds(t) unclamped inductive switching test circuit unclamped inductive switching waveforms
6n60-p power mosfet unisonic technologies co., ltd 7 of 7 www.unisonic.com.tw qw-r502-969.c ? typical characteristics drain current,i d (a) drain current, i d (a) drain current,i d (a) drain current,i d (a) utc assumes no responsib ility for equipment failures that result from using pr oducts at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
